Hydraulic Pump CB-B125

CB-B125 is a CB-B series low-pressure hydraulic external gear pump designed for hydraulic oil circulation, lubrication, oil transfer, and low-pressure hydraulic systems. Published technical references identify the CB-B125 with a nominal flow of 125 L/min at 1450 r/min and a pressure rating of approximately 2.5 MPa (25 bar). (Kemaipumps)

ASIA-MECH HYDRO-PNEUMATIC also lists CB-B125 as part of its CB-B hydraulic pump range for supply in Malaysia and overseas. (Asia-Mech)

Product Details

Item	Details
Product Name	Hydraulic Gear Pump CB-B125
Model Number	CB-B125
Series	CB-B Series
Pump Type	External gear hydraulic pump
Nominal Flow	125 L/min
Rated Speed	1450 r/min
Pressure	Up to 2.5 MPa / 25 bar*
Application	Low-pressure hydraulic and lubrication systems
Construction	Gear-type positive displacement pump
Typical Fluid	Hydraulic oil / lubricating oil
Supplier	ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD

*Pressure and performance can vary according to manufacturer, configuration, fluid, operating conditions and application. Confirm the manufacturer's datasheet before ordering.

Description

The CB-B125 hydraulic pump is a large-displacement model in the CB-B low-pressure gear pump series. The pump uses meshing gears to convert mechanical drive power into hydraulic flow. The CB-B design is known for a relatively simple construction and straightforward maintenance. (Wenzhou Solid Equipment)

The CB-B series is commonly used for machine tools, hydraulic machinery, engineering machinery, lubrication systems and oil-transfer applications. (Kemaipumps)

For replacement applications, it is important to verify flow, pressure, rotational direction, shaft configuration, mounting dimensions and port connections before selecting a CB-B125.

Key Features

• CB-B series hydraulic gear pump

• External gear positive-displacement design

• Nominal flow capacity of 125 L/min

• Rated speed commonly specified at 1450 r/min

• Suitable for low-pressure hydraulic applications

• Simple mechanical construction

• Suitable for hydraulic oil and lubrication applications

• Available for industrial replacement and machinery applications

• CB-B series includes multiple displacement sizes

Applications

The CB-B125 can be considered for:

• Hydraulic machinery

• Machine tools

• Industrial hydraulic systems

• Lubrication systems

• Oil-transfer systems

• Textile machinery

• Metallurgical equipment

• Mining equipment

• Petroleum and chemical equipment

• Engineering machinery

Published sources specifically identify CB-B pumps for hydraulic systems, lubrication, oil transfer and industrial machinery. (Wenzhou Solid Equipment)

CB-B Series Model Numbers

ASIA-MECH's listed CB-B range includes:

CB-B2.5, CB-B4, CB-B10, CB-B16, CB-B20, CB-B25, CB-B32, CB-B40, CB-B50, CB-B63, CB-B80, CB-B100, CB-B125, CB-B160, CB-B200, CB-B250, CB-B300, CB-B350, CB-B400, CB-B500

Additional listed variants include:

DCB-B160, DCB-B200, DCB-B250, DCB-B300, DCB-B350, DCB-B400, DCB-B500

XCB-B160, XCB-B200, XCB-B250, XCB-B300, XCB-B350, XCB-B400, XCB-B500. (Asia-Mech)

Specifications

A published CB-B series table gives the following information for CB-B125:

• Flow: 125 L/min

• Speed: 1450 r/min

• Pressure: 2.5 MPa

• Volumetric efficiency: ≥95%

• Shaft power: approximately 6.5 kW

These figures are published by third-party manufacturers/suppliers and should therefore be verified against the exact manufacturer's datasheet and pump configuration before procurement. (Hydraulic Pump Zuosen)

Important Selection Information

Before replacing an existing CB-B125, confirm:

1. Pump displacement/flow requirement

2. Maximum working pressure

3. Motor or engine speed

4. Rotation direction

5. Shaft diameter and shaft type

6. Mounting flange/dimensions

7. Suction and outlet port sizes

8. Hydraulic-fluid type and viscosity

9. Installation orientation

10. Original pump manufacturer's part number

FAQ

What is a CB-B125 hydraulic pump?

CB-B125 is a CB-B series hydraulic gear pump with a nominal published flow of approximately 125 L/min at 1450 r/min. It is intended primarily for low-pressure hydraulic, lubrication and oil-transfer applications. (Kemaipumps)

What pressure can CB-B125 handle?

Common published CB-B series data specifies 2.5 MPa (25 bar). However, the allowable pressure should be confirmed from the exact manufacturer's datasheet before operation. (Ronda Pump)

What is the flow rate of CB-B125?

The commonly published nominal flow is 125 L/min at 1450 r/min. (Hydraulic Pump Zuosen)

Is CB-B125 suitable for high-pressure hydraulic systems?

Generally, CB-B is considered a low-pressure gear pump series. For high-pressure applications, another hydraulic pump design may be more appropriate. (Ronda Pump)

Can ASIA-MECH supply CB-B125 in Malaysia?

Yes. ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD lists CB-B125 within its CB-B hydraulic pump range and supplies hydraulic pumps in Malaysia and overseas. (Asia-Mech)

Why Buy From ASIA-MECH HYDRO-PNEUMATIC?

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD supplies hydraulic pumps and industrial hydraulic components for manufacturing, construction, palm oil mills, mining, marine and OEM machinery applications.

We can assist with CB-B125 replacement selection, model identification, hydraulic pump sourcing and quotation.

Contact:

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD
Tel: +605-282 1518
Mobile / WhatsApp: +6016-550 2288
Email: asiamech88@gmail.com

Delivery available throughout Malaysia, including Perak, Penang, Kedah, Perlis, Selangor, Kuala Lumpur, Johor, Pahang, Sabah and Sarawak, with international supply also available.

Related Models

• CB-B100

• CB-B125

• CB-B160

• CB-B200

• CB-B250

• CB-B300

• CB-B350

• CB-B400

• CB-B500

Alternative Model Selection

Depending on the required flow and application, alternatives within the CB-B family may include CB-B100 or CB-B160. Selection should be based on the required flow, pressure, speed, mounting arrangement and shaft configuration rather than model number alone.

SEO Meta Data

Meta Title:
Hydraulic Pump CB-B125 | 125 L/min Gear Pump Malaysia

Meta Description:
CB-B125 hydraulic gear pump with 125 L/min nominal flow at 1450 rpm. Supply and replacement hydraulic pump from ASIA-MECH, Malaysia.

SEO Keywords:
CB-B125 hydraulic pump, CB-B125 gear pump, CB-B 125 pump, hydraulic gear pump Malaysia, CB-B125 pump Malaysia, 125 L/min hydraulic pump, low pressure hydraulic gear pump, CB-B series pump, hydraulic pump supplier Malaysia, hydraulic pump Perak, hydraulic gear pump supplier

Suggested Product URL Slug:
hydraulic-pump-cb-b125

AEO Answer:
CB-B125 is a low-pressure CB-B series hydraulic gear pump commonly specified at 125 L/min and 1450 rpm, with published CB-B series pressure ratings around 2.5 MPa. It is used for hydraulic, lubrication and oil-transfer applications. (Kemaipumps)

CB-B Series Hydraulic Pump SUPPLY BY ASIA-MECH MALAYSIA PHILIPINES THAILAND INDONESIA

CB-B2.5
CB-B4
CB-B10
CB-B16
CB-B20
CB-B25
CB-B32
CB-B40
CB-B50
CB-B63
CB-B80
CB-B100
CB-B125
CB-B160
CB-B200
CB-B250
CB-B300
CB-B350
CB-B400
CB-B500
DCB-B160
DCB-B200
DCB-B250
DCB-B300
DCB-B350
DCB-B400
DCB-B500
XCB-B160
XCB-B200
XCB-B250
XCB-B300
XCB-B350
XCB-B400
XCB-B500