150ZW200-15 Oil Pump / ZW Series Self-Priming Pump

Product Name

150ZW200-15 Oil Pump

Model Number

150ZW200-15

Brand

ZW Series / Brand to be confirmed

Product Category

Oil Pump | Industrial Pump | Self-Priming Non-Clogging Pump

Product Details

The 150ZW200-15 is a ZW-series industrial pump model with a nominal 150 mm pump size and a rated head of approximately 15 m. Published specifications identify the model with a flow range of approximately 150–200 m³/h, while ASIA-MECH HYDRO-PNEUMATIC's product listing records the model with a 1450 rpm operating speed and 18.5 kW motor power configuration.

The ZW series is commonly used for self-priming and non-clogging fluid transfer, drainage and sewage-handling applications. The exact fluid compatibility should always be confirmed before using the pump for oil or other industrial liquids.

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD supplies the 150ZW200-15 Oil Pump / ZW Series Pump in Malaysia and can assist customers with model selection, replacement requirements, availability and technical verification.

Description

The 150ZW200-15 Oil Pump is an industrial pump model designed for applications requiring high-volume fluid transfer and self-priming capability.

Published documentation identifies the 150ZW200-15 with a 150 mm nominal diameter, 150–200 m³/h flow range, and 15–20 m head range in one drainage-pump configuration. ASIA-MECH's existing model table lists a 200 m³/h capacity, 15 m head, 18.5 kW power and 1450 rpm configuration. Because pump specifications can vary according to manufacturer and configuration, customers should verify the exact nameplate and datasheet before ordering.

For industrial replacement or new equipment applications, please provide the existing pump nameplate, dimensions or application details so the correct configuration can be confirmed.

Features

• ZW-series industrial pump configuration

• Self-priming pump design

• Non-clogging pump configuration

• Suitable for high-volume fluid transfer applications

• 150 mm nominal pump size

• Available in industrial pumping configurations

• Suitable for drainage and fluid-handling applications where the pump specification is appropriate

• Replacement and aftermarket sourcing available

• Technical model verification available before ordering

Applications

Depending on the exact pump configuration and fluid being handled, the 150ZW200-15 may be considered for:

• Industrial fluid transfer

• Drainage systems

• Wastewater handling

• Sewage pumping

• Industrial water transfer

• Construction-site drainage

• Manufacturing facilities

• Mining applications

• Palm oil mill applications

• Marine and industrial fluid-handling systems

• OEM machinery and pumping equipment

Important: If the intended application is specifically hydraulic oil, lubricating oil or other petroleum-based oil, fluid viscosity, temperature, seal material, pump construction and manufacturer approval should be verified before purchase. The ZW model is also documented as a sewage/drainage pump, so it should not automatically be treated as a conventional hydraulic oil pump.

Specifications

Specification	150ZW200-15
Model	150ZW200-15
Pump Series	ZW Series
Nominal Diameter	150 mm
Reported Flow	150–200 m³/h
Listed Flow Configuration	200 m³/h
Head	15–20 m published range
Listed Head Configuration	15 m
Motor Power	18.5 kW in ASIA-MECH listing
Speed	1450 rpm in ASIA-MECH listing
Pump Type	Self-priming / non-clogging configuration
Exact Manufacturer	To be confirmed
Exact Material	To be confirmed
Seal Type	To be confirmed
Voltage	To be confirmed
Frequency	To be confirmed
Dimensions	To be confirmed

The flow, head, power and speed values above are based on the published model information found for 150ZW200-15. Exact specifications can vary by manufacturer and configuration; therefore, nameplate and manufacturer datasheet verification is recommended before ordering.

Why Choose ASIA-MECH HYDRO-PNEUMATIC?

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD supplies industrial pumps, hydraulic pumps, hydraulic motors, hydraulic valves, cylinders, pneumatic components and automation products throughout Malaysia.

Our team can assist with:

• Model identification

• Pump replacement

• Technical specification checking

• OEM and aftermarket sourcing

• Original and genuine product sourcing where available

• Industrial spare-part supply

• Door-to-door delivery

• Malaysia and international enquiries

Customers can contact us with the pump model number, nameplate photograph, existing pump photograph or application details for technical checking.

FAQ

What is the 150ZW200-15?

The 150ZW200-15 is a ZW-series industrial pump model. Published documentation identifies it as a self-priming, non-clogging pump configuration with a 150 mm nominal diameter and approximately 150–200 m³/h flow range.

What is the flow rate of the 150ZW200-15?

Published documentation gives a flow range of approximately 150–200 m³/h, while the ASIA-MECH model table lists 200 m³/h for the 150ZW200-15 configuration.

What is the head of the 150ZW200-15?

Published documentation gives a head range of approximately 15–20 m, while the ASIA-MECH listing identifies a 15 m configuration.

What motor power does the 150ZW200-15 use?

The ASIA-MECH product listing identifies the 150ZW200-15 with an 18.5 kW configuration at 1450 rpm. Exact motor specifications should be confirmed against the supplied unit.

Is the 150ZW200-15 suitable for oil?

The model is listed as an ''Oil Pump'' on ASIA-MECH's product catalogue, but published ZW-series documentation also identifies the model as a self-priming drainage/sewage pump. Therefore, do not assume compatibility with hydraulic oil or lubricating oil without confirming the pump construction, seals, viscosity range and manufacturer's fluid specifications.

Can ASIA-MECH supply the 150ZW200-15 in Malaysia?

Yes. ASIA-MECH HYDRO-PNEUMATIC lists the 150ZW200-15 among its industrial pump products and serves customers in Malaysia.

Can I use this as a replacement pump?

Replacement suitability depends on flow, head, connection size, motor power, speed, mounting arrangement, fluid type and dimensions. Send the existing pump nameplate or photograph to ASIA-MECH for model verification.

Related 150ZW Models

The following 150ZW models are listed in the available ASIA-MECH model information:

• 150ZW180-14

• 150ZW150-20

• 150ZW200-15

• 150ZW200-20

• 150ZW180-20

• 150ZW160-30

• 150ZW180-30

• 150ZW180-38

• 150ZW150-45

These are related models, not necessarily direct replacements. Flow, head, motor power and operating conditions differ between models.

Other Related ZW Models

Other models appearing in the published model range include:

• 100ZW80-60

• 125ZW120-20

• 200ZW280-14

• 200ZW280-20

• 200ZW300-20

• 200ZW280-28

• 250ZW420-20

• 300ZW800-14

Exact availability and specifications should be confirmed before quotation.

Alternative Models

Alternative pump selection depends on the required flow, head, fluid, connection size and installation conditions. Customers should not substitute another model based on model-number similarity alone.

For an accurate alternative, provide:

1. Required flow rate

2. Required head/pressure

3. Fluid type

4. Fluid temperature

5. Suction condition

6. Pipe size

7. Motor voltage/frequency

8. Existing pump model or nameplate

Datasheet / Catalogue / PDF

Datasheet and catalogue: Available upon request.

For technical confirmation, please provide the pump nameplate or existing equipment details. Specifications should be verified with the manufacturer/supplier before final ordering.

SEO Meta Title

150ZW200-15 Oil Pump | ZW Series Pump Malaysia

SEO Meta Description

150ZW200-15 Oil Pump / ZW Series pump supplied by ASIA-MECH Malaysia. 150 mm, 200 m³/h configuration, 15 m head and 18.5 kW. Enquire now.

SEO Keywords

150ZW200-15
150ZW200-15 oil pump
150ZW200-15 pump
150ZW200-15 Malaysia
150ZW200-15 supplier Malaysia
ZW pump Malaysia
ZW series pump
self priming pump Malaysia
non clogging pump Malaysia
industrial pump Malaysia
industrial oil pump Malaysia
drainage pump Malaysia
sewage pump Malaysia
fluid transfer pump Malaysia
150mm pump Malaysia
industrial pump supplier Perak
pump supplier Ipoh
oil pump supplier Malaysia
ASIA-MECH oil pump
ASIA-MECH HYDRO-PNEUMATIC

AEO / GEO Answer

Where can I buy a 150ZW200-15 pump in Malaysia?

The 150ZW200-15 is available through ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD, an industrial hydraulic and pump supplier based in Ipoh, Perak, Malaysia. Customers can contact ASIA-MECH for model verification, replacement pump sourcing, technical information and delivery arrangements.

Supplier Information

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD

Tel: 6-05-2821518 / 6016-5502288
Mobile / WhatsApp: +60 16-550 2288
Email: asiamech88@gmail.com

Malaysia Delivery:
Perlis, Penang, Kedah, Perak, Pahang, Kuala Lumpur, Selangor, Melaka, Johor, Kelantan, Kuantan, Sabah and Sarawak.

International Delivery:
Malaysia, Singapore, Thailand, Indonesia, Philippines, Vietnam, Europe and worldwide, subject to shipping arrangements.

Product Supply:
Hydraulic Pumps | Hydraulic Motors | Hydraulic Valves | Hydraulic Cylinders | Pneumatic Components | Industrial Automation Components | Industrial Pumps

ASIA-MECH HYDRO-PNEUMATIC — your local industrial hydraulics and pump supplier in Malaysia.

 SUPPLY BY ASIA-MECH MALAYSIA PHILIPINES THAILAND INDONESIA

ZW Oil Pump Type:

model	OD(mm)		flow(m3/h)	Stocke(m)	Speed	speed	Time			Weight
	INLET	OUTLET			(kw)	(r/min)	(min/5m)	(%)	(m)	(kg)
25ZW8-15	25	25	8	15	1.5	2900	3	45	2	100
25ZW8-30	25	25	8	30	3	2900	3	45	2	120
32ZW5-20	32	32	5	20	2.2	2900	3	45	2.5	100
32ZW10-20	32	32	10	20	2.2	2900	3	45	2.5	100
32ZW9-30	32	32	9	30	3	2900	3	48	2.5	120
40ZW10-20	40	40	10	30	2.2	2900	3	45	2.5	100
40ZW20-15	40	40	20	15	2.2	2900	3	45	2.5	100
40ZW15-30	40	40	15	30	3	2900	3	48	2.5	120
50ZW10-20	50	50	10	20	2.2	2900	3	45	2.5	100
50ZW20-12	50	50	20	12	2.2	2900	3	45	2.5	100
50ZW18-20	50	50	18	20	3	2900	3	45	2.5	120
50ZW15-30	50	50	15	30	3	2900	3	48	2.5	120
50ZW20-35	50	50	20	35	5.5	2900	3	48	2.5	150
50ZW25-30	50	50	25	30	5.5	2900	3	48	2.5	150
50ZW20-40	50	50	20	40	7.5	2900	3	48	2.5	200
50ZW20-50	50	50	20	50	11	2900	3	48	2.5	250
65ZW30-18	65	65	30	18	4	2900	3	45	2.5	160
65ZW30-18	65	65	30	18	4	1450	3	45	2.5	200
65ZW25-30	65	65	25	30	5.5	2900	3	50	3	200
65ZW25-40	65	65	25	40	7.5	2900	3	50	3	200
65ZW40-25	65	65	40	25	7.5	2900	3	50	3	200
65ZW50-30	65	65	50	30	7.5	2900	3	50	3	200
65ZW65-25	65	65	65	25	7.5	2900	3	52	3	200
65ZW25-50	65	65	25	50	11	2900	3	53	3	280
80ZW40-16	80	65	40	16	4	2900	3	50	3	180
80ZW40-16	80	65	40	16	4	1450	3	50	3	200
80ZW50-20	80	65	50	20	5.5	1450	3	50	3	240
80ZW40-25	80	65	40	25	7.5	2900	2	50	3	200
80ZW25-40	80	65	25	40	7.5	2900	2	50	3	200
80ZW65-25	80	65	65	25	7.5	2900	2	52	3	240
80ZW80-20	80	65	80	20	7.5	1450	3	52	3	240
80ZW80-35	80	65	80	35	15	2900	3	45	3	285
80ZW40-50	80	65	40	50	18.5	2900	2	50	3	293
80ZW50-60	80	65	50	60	22	2900	3	55	3	326
100ZW100-15	100	80	100	15	7.5	1450	3	50	4	300
100ZW80-20	100	80	80	20	7.5	1450	3	53	4	300
100ZW100-20	100	80	100	20	11	1450	3	53	4	340
100ZW100-30	100	80	100	30	22	2900	2	53	4	510
100ZW80-45	100	80	80	45	30	2900	2	55	4	560
100ZW80-60	100	80	80	60	45	2900	2	53	4	585
125ZW120-20	125	125	120	20	15	1450	2	55	4	500
150ZW180-14	150	125	180	14	15	1450	3.5	60	5	500
150ZW150-20	150	125	150	20	15	1450	3.5	60	5	500
150ZW200-15	150	125	200	15	18.5	1450	3.5	60	5	550
150ZW200-20	150	125	200	20	22	1450	3	60	5	570
150ZW180-20	150	125	180	20	22	1450	3	60	5	570
150ZW160-30	150	125	160	30	30	1450	3	65	5	680
150ZW180-30	150	125	180	30	37	1450	3	65	5	700
150ZW180-38	150	125	180	38	55	1450	3.5	45	5	800
150ZW150-45	150	125	150	45	55	1450	3.5	45	5	800
200ZW280-14	200	150	280	14	22	1450	3	65	5	820
200ZW280-20	200	150	280	20	37	1450	3	62	5	910
200ZW300-20	200	150	300	20	45	1450	3	59	5	948
200ZW280-28	200	150	280	28	55	1450	3	55	4.8	1090
250ZW420-20	250	200	420	20	55	1450	2.5	61	6	1150
300ZW800-14	300	250	800	14	55	1450	2.5	65	6	1400