Below is a WooCommerce-ready product page for the Bijur Delimon ZVB Dual-Line Valve, with the technical information limited to specifications I could verify from Bijur Delimon's official documentation. The official manufacturer identifies the product as ZV-B, while the product family/page is presented as ZVB Dual-Line Valves. (Bijur Delimon)

Bijur Delimon ZVB Dual-Line Valves

Product Name: Bijur Delimon ZVB / ZV-B Dual-Line Valve
Model / Series: ZVB / ZV-B
Brand: Bijur Delimon
Product Type: Dual-Line Lubrication Distributor / Metering Valve
Application: Centralized dual-line lubrication systems
Lubricant: Oil and grease

Product Details

The Bijur Delimon ZVB Dual-Line Valve, also designated ZV-B, is a dual-line distributor designed for centralized lubrication systems. It meters lubricant and delivers the metered quantity to lubrication points through the connected lubrication lines. Bijur Delimon states that the distributor is suitable for both grease and oil and can operate independently of back pressure at the lubrication points. (Bijur Delimon)

The ZV-B family is available with configurations from 1 to 8 outlets, with specified metered volumes of 0.5, 1.5 and 3.0 cm³. The manufacturer also provides a ZVB configurator for selecting the number of outlets, revision, metered volume, metering arrangement and accessories. (Bijur Delimon)

Key Features

• Dual-line centralized lubrication distributor

• Suitable for oil and grease

• Available with up to 8 outlets

• Metered volume options of 0.5, 1.5 and 3.0 cm³

• Exact delivery rate for each outlet

• Continuous delivery-rate adjustment available depending on configuration

• Visual monitoring of distributor cycles

• System can be extended with additional distributors

• Available in machined steel and stainless-steel versions

• Designed for industrial centralized lubrication applications (Bijur Delimon)

Verified Specifications

Specification	ZVB / ZV-B
Product type	Dual-line distributor
Lubricant	Oil / Grease
Number of outlets	1–8
Metered volume	0.5 / 1.5 / 3.0 cm³
Maximum working pressure	400 bar
Minimum actuating pressure	10 bar
Material	Machined steel or stainless steel
Stainless-steel material references	1.4305 / 1.4404

The maximum working pressure of 400 bar and minimum actuating pressure of 10 bar are stated in the manufacturer's operator documentation. (Bijur Delimon)

Important: Exact dimensions, thread configuration, outlet arrangement, metering adjustment and accessories depend on the selected ZV-B configuration. These should be verified against the manufacturer's datasheet and the exact configuration/part number before ordering.

ZVB Outlet Configurations

The ZVB family covers configurations with:

• 1 outlet

• 2 outlets

• 3 outlets

• 4 outlets

• 5 outlets

• 6 outlets

• 7 outlets

• 8 outlets

The manufacturer's current product page confirms an up-to-8-outlet configuration and provides a dedicated configurator for selecting the required configuration. (Bijur Delimon)

ZVB / ZV-B Configuration and Accessories

Bijur Delimon's official product listing includes ZV-B components and accessories such as:

• Indicator pin and delivery-adjustment assembly

• 1/4'' to 10 mm outlet fitting

• 3/8'' to 10 mm inlet fitting

• Shim for 1 & 2 outlets

• Shim for 3 & 4 outlets

• Shim for 5 & 6 outlets

• Shim for 7 & 8 outlets

• ZVB Dual-Line Valve Configurator (Bijur Delimon)

Applications

The Bijur Delimon ZVB is suitable for centralized lubrication systems used in demanding industrial environments, including:

• Manufacturing machinery

• Steel-processing equipment

• Mining machinery

• Construction machinery

• Cement and aggregate equipment

• Palm oil mill machinery

• Marine and heavy industrial equipment

• OEM machinery

• Large bearing lubrication systems

• Conveyor systems

• Industrial production lines

The dual-line concept is particularly suitable for systems covering long distances and applications requiring robust centralized lubrication distribution. Bijur Delimon describes dual-line systems as a robust solution for applications covering greater distances. (Bijur Delimon)

How the ZVB Dual-Line System Works

A dual-line lubrication system uses two main pressure lines connected to the distributor network. Lubricant is alternately supplied through the two lines, allowing the ZV-B distributors to meter lubricant to the connected lubrication points.

The ZV-B distributor therefore acts as the metering/distribution element, while a suitable pump and reversing/control valve can be used as part of the complete dual-line system. Bijur Delimon specifically identifies the BS-B pump as being used in combination with ZV-B distributors in dual-line lubrication systems. (Bijur Delimon)

A DR45 reversing valve, for example, alternates lubricant flow between the two main lines during system cycles. (Bijur Delimon)

ZVB Service Parts

Bijur Delimon also lists dedicated ZVB service parts and kits, including adjustment/indicator components and sealing kits. Current manufacturer references include:

• ZVBETA0001 – SP-Kit Adj Device / Motion Indicator

• ZVBETA0002 – Kit Adj + Indicator

• ZVBETA0003 – SP-Kit Adj Device / Motion Indicator

• ZVBETA0005 – SP-Kit Sealings 0.5 & 1.5

The manufacturer currently lists additional ZVB service-part references in its service-parts catalogue. (Bijur Delimon)

Frequently Asked Questions

What is a Bijur Delimon ZVB valve?

The ZVB, also called ZV-B, is a dual-line lubrication distributor used to meter and distribute oil or grease in centralized lubrication systems. (Bijur Delimon)

How many outlets does the ZVB have?

The ZVB product family supports configurations from 1 to 8 outlets. (Bijur Delimon)

Is the ZVB suitable for grease?

Yes. The manufacturer's documentation specifies the ZV-B for grease and oil applications. (Bijur Delimon)

What are the ZVB metering volumes?

The documented metered volumes are 0.5, 1.5 and 3.0 cm³. The exact selection depends on the valve configuration. (Bijur Delimon)

What is the maximum pressure of the ZVB?

The manufacturer's operator manual specifies a maximum working pressure of 400 bar. (Bijur Delimon)

Can the ZVB be used for palm oil mill equipment?

Yes. Its dual-line centralized lubrication design can be applied to heavy industrial machinery such as equipment commonly found in palm oil mills, subject to correct system sizing and configuration.

Do I need the complete ZVB part number to order?

For an exact replacement, yes, preferably. ZVB configurations can differ by outlet quantity, metering volume, revision and accessories. Bijur Delimon provides a configurator specifically for these selections. (Bijur Delimon)

Can ASIA-MECH supply ZVB valves in Malaysia?

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD can assist with sourcing Bijur Delimon ZVB / ZV-B dual-line lubrication valves, including configuration verification and replacement enquiries.

Related Models / Components

• Bijur Delimon ZV-B / ZVB

• Bijur Delimon ZVB Configurator

• Bijur Delimon BS-B Lubrication Pump

• Bijur Delimon DR45 Reversing Valve

• Bijur Delimon ZVB Service Parts

• Bijur Delimon ZPA Divider

The BS-B is specifically documented by Bijur Delimon for use with ZV-B distributors in dual-line lubrication systems. (Bijur Delimon)

Alternative Models

For applications where the ZVB is not the appropriate configuration, Bijur Delimon also offers other dual-line distribution valves, including:

• DD Dualine Valves — 1–12 outlets

• DM Dualine Valves — 1–4 outlets

• DR45 Series Reversing Valves — system reversing function

These are different product families and should not be treated as direct drop-in replacements without checking the lubrication-system requirements. (Bijur Delimon)

All Verified ZVB Product / Part References Found

ZVB Main Product Family

• ZVB

• ZV-B

• ZVB-Configurator

Current ZV-B Catalogue References

• 65122-1231

• 734461414

• 734461424

• 743623611

• 743623621

• 743623631

• 743623641

• ZVB-Configurator

These references are listed by Bijur Delimon on its current ZVB product page. Some are accessories/components rather than complete valve assemblies, so they should not be treated as interchangeable valve model numbers. (Bijur Delimon)

ZVB Service-Part References

• ZVBETA0001

• ZVBETA0002

• ZVBETA0003

• ZVBETA0004

• ZVBETA0005

• ZVBETA0006

• ZVBETA0007

• ZVBETA0008

• ZVBETA0009

• ZVBETA0010

• ZVBETA0011

• ZVBETA0012

• ZVBETA0013

• ZVBETA0014

• ZVBETA0015

• ZVBETA0016

• ZVBETA0017

• ZVBETA0018

• ZVBETA0019

• ZVBETA0020

• ZVBETA0021

• ZVBETA0022

• ZVBETA0026

• ZVBETA0027

The manufacturer currently lists 28 ZVB service-part items across its service-parts pages. (Bijur Delimon)

Note: This is the verified list I could obtain from the current official Bijur Delimon online catalogue. Historical/obsolete ZVB configurations may have additional legacy part numbers. Exact replacement should therefore be confirmed from the valve nameplate, configuration code or original datasheet.

---

SEO Information

SEO Title:
Bijur Delimon ZVB Dual-Line Valve | ZV-B Lubrication Distributor Malaysia

Meta Description:
Buy Bijur Delimon ZVB ZV-B dual-line valves in Malaysia. Oil and grease lubrication distributors with 1–8 outlets and 0.5, 1.5 or 3.0 cm³ metering volumes.

Focus Keyword:
Bijur Delimon ZVB Dual-Line Valve

Secondary Keywords:

• Bijur Delimon ZVB

• Bijur Delimon ZV-B

• ZVB valve Malaysia

• ZV-B valve Malaysia

• ZVB dual line valve

• ZVB lubrication distributor

• Bijur Delimon lubrication valve

• dual-line lubrication distributor

• dual-line grease valve

• dual-line oil valve

• centralized lubrication valve

• industrial lubrication system Malaysia

• Bijur Delimon distributor Malaysia

• ZVB spare parts

• ZVB service kit

Suggested WooCommerce Category:
Lubrication System → Dual-Line Lubrication → Dual-Line Valves → Bijur Delimon ZVB

Suggested Product Tags:
Bijur Delimon · ZVB · ZV-B · Dual-Line Valve · Lubrication Valve · Grease Valve · Oil Lubrication · Centralized Lubrication · Industrial Lubrication · Malaysia

Datasheet / Catalog

The official Bijur Delimon ZVB page provides access to the ZV-B Datasheet, Operator Manual and Service Card. (Bijur Delimon)

Bijur Delimon ZVB Official Product Page
ZVB Dual-Line Valve Configurator & Datasheet

Order / Enquiry

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD

Tel: 6-05-2821518 / 6016-5502288
Mobile / WhatsApp: +60 16-550 2288
Email: asiamech88@gmail.com

We offer sourcing and direct ordering for original genuine and aftermarket industrial brands, with door-to-door delivery.

Malaysia: Perlis, Penang, Kedah, Perak, Pahang, Kuala Lumpur, Selangor, Melaka, Johor, Kelantan, Kuantan, Sabah & Sarawak.

International: Malaysia, Singapore, Thailand, Indonesia, Philippines, Vietnam, Europe and worldwide.

For an exact ZVB replacement, send us the complete model/part number, nameplate information, or a clear photo of the existing valve. We can help verify the required configuration before quotation.