Horiuchi Hydraulic Cylinder FF-SA-1TC32BB180ABD-N

Brand: Horiuchi Machinery Co., Ltd.
Product Type: Hydraulic Cylinder
Series: F Series / FF
Model Number: FF-SA-1TC32BB180ABD-N

 

 

 

 

Product Details

The Horiuchi FF-SA-1TC32BB180ABD-N is a Horiuchi Machinery F-Series tie-rod hydraulic cylinder intended for industrial hydraulic applications.

Horiuchi's official product information identifies the FF series as a 14 MPa tie-rod hydraulic cylinder series, available with various mounting configurations including TA and TC. The FF series covers bore sizes from 32 mm to 250 mm, depending on configuration.

The exact model should be ordered using the complete designation FF-SA-1TC32BB180ABD-N, because the suffixes and configuration codes determine the cylinder's mounting and construction details.

Description

The Horiuchi FF series is designed for applications requiring reliable hydraulic linear movement. The tie-rod construction provides a practical and serviceable cylinder design for industrial machinery and OEM hydraulic systems.

Horiuchi identifies its FF series at a nominal pressure of 14 MPa.

For this specific model, FF-SA-1TC32BB180ABD-N, the model designation indicates a 32 mm bore configuration and 180 mm stroke, but these dimensions should be confirmed against the manufacturer's drawing or cylinder nameplate before final ordering.

Horiuchi also states that its F-series cylinders are available in various mounting forms, including flange, clevis and trunnion configurations. (Horiuchi)

Features

• Genuine Horiuchi Machinery hydraulic cylinder

• F-Series / FF-Series tie-rod construction

• Industrial hydraulic cylinder design

• 14 MPa nominal-pressure FF series

• Available in multiple bore sizes and mounting configurations

• Suitable for OEM machinery and hydraulic equipment

• Designed for industrial linear actuation

• Replacement cylinder sourcing available

• Suitable for maintenance and replacement applications

Applications

The Horiuchi FF hydraulic cylinder can be used in applications such as:

• Manufacturing machinery

• Industrial automation equipment

• Machine tools

• Hydraulic machinery

• Construction equipment

• Material-handling equipment

• Palm oil mill machinery

• Mining equipment

• Marine equipment

• OEM machinery

• Hydraulic replacement applications

Horiuchi describes hydraulic cylinders as components that convert hydraulic energy into linear mechanical movement and lists applications including construction and industrial machinery. (Horiuchi)

Verified Specifications

Specification	Information
Brand	Horiuchi Machinery Co., Ltd.
Series	F Series
Cylinder Series	FF
Cylinder Type	Tie-rod type
Model	FF-SA-1TC32BB180ABD-N
Nominal Pressure	14 MPa — verified for FF series
Bore	32 mm — indicated by model designation; verify exact model
Stroke	180 mm — indicated by model designation; verify exact model
Mounting	SA / TC configuration indicated by model code; verify drawing
Rod Diameter	Not verified
Port Size	Not verified
Overall Length	Not verified
Proof Pressure	Not verified for this exact model
Seal Material	Not verified
Cushion	Not verified

Important: Do not use unverified dimensions, rod diameter, port thread, proof pressure or seal specifications when selecting a replacement. Horiuchi's documentation indicates that the cylinder label contains important information such as serial number, cylinder bore, rod diameter, nominal pressure and proof pressure. (Horiuchi)

Model Number Breakdown

FF-SA-1TC32BB180ABD-N

Code	Interpretation
FF	Horiuchi F-Series FF cylinder
SA	Configuration/designation
1TC	Mounting/configuration code indicated in model
32	Bore designation
BB	Configuration code
180	Stroke designation
ABD	Configuration code
N	Additional configuration/suffix

Note: The complete manufacturer coding should be confirmed from the Horiuchi catalog/drawing. The table above should not be treated as an official decoding of every suffix.

Related Horiuchi FF Models

Horiuchi's official F-Series information lists FF cylinders with a range of mounting types including:

S, LA, LB, LC, FA, FB, FC, FD, CF, CA, CB, CC, TA and TC.

Available FF-series bore sizes listed by Horiuchi include:

32, 40, 50, 63, 80, 100, 125, 140, 150, 160, 180, 200, 224 and 250 mm.

Other Horiuchi F-Series / FF Family Models

• FF-SA-1TC32BB180ABD-N

• FF series with S mounting

• FF series with LA mounting

• FF series with LB mounting

• FF series with LC mounting

• FF series with FA mounting

• FF series with FB mounting

• FF series with FC mounting

• FF series with FD mounting

• FF series with CF mounting

• FF series with CA mounting

• FF series with CB mounting

• FF series with CC mounting

• FF series with TA mounting

• FF series with TC mounting

Horiuchi also publishes an old-series compatibility table, showing that previous F-series designations can have compatibility with current FS/FF configurations, although individual dimensions and packing should still be checked. (Horiuchi)

Alternative Models

For a replacement, do not select an alternative cylinder based only on the 32 mm bore and 180 mm stroke.

The following should be matched:

• Bore

• Stroke

• Rod diameter

• Mounting dimensions

• Mounting type

• Port location

• Port thread

• Retracted length

• Extended length

• Operating pressure

• Seal material

• Cushion configuration

• Sensor/switch requirements

Horiuchi specifically recommends considering required output, operating pressure, speed, load, maximum pressure, stroke and operating oil when selecting a hydraulic cylinder. (Horiuchi)

FAQ

What is Horiuchi FF-SA-1TC32BB180ABD-N?

It is a Horiuchi Machinery FF-Series tie-rod hydraulic cylinder for industrial hydraulic applications.

What pressure is the Horiuchi FF series rated for?

Horiuchi's official product information lists the FF series at 14 MPa nominal pressure.

What is the bore of FF-SA-1TC32BB180ABD-N?

The model designation contains 32, indicating a 32 mm bore configuration. The exact specification should be confirmed from the manufacturer's drawing or nameplate before ordering.

What is the stroke?

The model designation contains 180, indicating a 180 mm stroke configuration. Confirm the actual cylinder specification before replacement.

Is FF-SA-1TC32BB180ABD-N a Horiuchi hydraulic cylinder?

Yes. It belongs to the Horiuchi F-Series FF tie-rod hydraulic cylinder family.

Can ASIA-MECH supply this cylinder?

Yes. ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD can assist customers in Malaysia and overseas with sourcing Horiuchi hydraulic cylinders, replacement cylinders and other hydraulic components, subject to model and stock confirmation.

What information should I provide when requesting a quotation?

Provide the complete model number, FF-SA-1TC32BB180ABD-N, and preferably a photograph of the cylinder/nameplate. Horiuchi recommends using the cylinder's serial number when making product inquiries. (Horiuchi)

Datasheet / Catalog

For technical verification, Horiuchi provides official documentation for its F-series cylinders and maintenance manuals. (Horiuchi)

Horiuchi Machinery – Official Website

Horiuchi F-Series Product Information

SEO

Meta Title:
Horiuchi FF-SA-1TC32BB180ABD-N Hydraulic Cylinder Malaysia

Meta Description:
Horiuchi FF-SA-1TC32BB180ABD-N hydraulic cylinder, F-Series tie-rod type, 32 mm bore and 180 mm stroke configuration. Contact ASIA-MECH Malaysia for quotation and sourcing.

SEO Keywords:

• Horiuchi FF-SA-1TC32BB180ABD-N

• Horiuchi hydraulic cylinder

• FF-SA hydraulic cylinder

• Horiuchi FF cylinder

• Horiuchi F Series hydraulic cylinder

• Horiuchi hydraulic cylinder Malaysia

• Horiuchi cylinder supplier Malaysia

• 32mm hydraulic cylinder

• 180mm hydraulic cylinder

• tie rod hydraulic cylinder Malaysia

• industrial hydraulic cylinder

• hydraulic cylinder supplier Malaysia

• Horiuchi Machinery Malaysia

Suggested URL Slug:
horiuchi-ff-sa-1tc32bb180abd-n-hydraulic-cylinder

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD

Hydraulic Pumps | Hydraulic Motors | Hydraulic Valves | Hydraulic Cylinders | Pneumatic Components | Industrial Automation Components

Tel: 05-2821518 / +60 16-550 2288
WhatsApp: +60 16-550 2288
Email: asiamech88@gmail.com

Delivery across Malaysia: Perlis, Penang, Kedah, Perak, Pahang, Kuala Lumpur, Selangor, Melaka, Johor, Kelantan, Kuantan, Sabah and Sarawak.

International delivery: Malaysia, Singapore, Thailand, Indonesia, Philippines, Vietnam, Europe and worldwide.

ASIA-MECH HYDRO-PNEUMATIC (M) SDN BHD offers direct ordering for genuine original and aftermarket hydraulic brands, with door-to-door delivery subject to destination and product availability.

For quotation: Send us the complete model number FF-SA-1TC32BB180ABD-N, quantity required and a photo/nameplate if available.